Press Online

Get The Facts On Clogged Drains And How To Fix Them

Fix a clogged pipe immediately to avoid water backing up into your home. Drain rods are the most common and fastest way to unclog pitched fibre drains.

To use a drain rod, you must combine enough rods to cover the full circumference of the drain. The rod can be manipulated to break up the debris blocking the water’s path so that it can run freely again. Pipe jetting can clear out a clogged pipe after a rod has been used to free it.

What Is Pitch Fibre?

During World War II, when raw materials were scarce, scientists at DuPont created a material called “pitch fibre,” which consisted of wood cellulose impregnated with coal tar and asbestos for reinforcement. It was widely used in post-war construction until plastic drainage took over in the 1970s because it was lighter and more affordable than vitrified clay drainage.

Can You Tell Me The Downfalls?

When hot water, fat, oil, and grease are frequently poured down the drain, the pitch fibres collapse under external pressure and delaminate internally, causing blisters. The pipe can also deform and blister if exposed to water for an extended period.

If you find a clogged drain and determine it is due to a problem with pitch fibre piping, drain unblocking professionals can help.

What Is “Drain Rodding”?

Do you know what is drain rodding and how to clear your drains with rodding? “Rodding” refers to clearing a drain using a long, thin, flexible plumbing rod. The polypropylene used in constructing these rods is of the highest quality and is specifically intended to prevent damage to your pipes while clearing out obstructions.

How Do I Use A Rod To Clear An Outdoor Drain?

Removing an external obstruction is a simple procedure requiring patience and the right tools. A good drainage rod, some robust gloves, a pressure hose, and a healthy amount of persistence are all things you should have on hand. Outdoor obstructions range in intensity from easily overcome to those that demand herculean efforts to shift.

The different kinds of debris that can clog exterior pitched fibre drains should also be considered. Flooding from severe storms is a common cause of clogged external sewers because it deposits thick layers of mud and silt and larger debris like leaves and tree limbs. Clearing out the sewage, septic tank, or toilet will take more time and attention to detail, but it can be done.

Once a drainage rod is set up and ready to go, it can sort through the mess. The depth of the obstruction can be determined, and the barrier can be moved, softening the mud and silt so they can be removed more easily. To loosen the debris, probe the rod into the drainage channel and twist it anticlockwise.

After a significant quantity of muck and silt has been removed, the remaining obstruction can be washed away with a pressure hose. Blast the muck and silt out of the waterway by aiming the hose at the drainage reservoir. If you follow these steps until the water drains freely, you will have effectively cleared a clogged outdoor drain of mud and silt.


Now you know what drain rodding is and how to clear your drains with rodding. Despite the effectiveness of drain rods, deeper blockages or less flexible rods may require more complex services.

Comments are closed.